Products

ArrowClean

Chem Arrow offers a complete line of high performance, in process cleaners. Our 40 years of experience and formulating expertise has resulted in the creation of products that meet a wide variety of needs.


ArrowClean 25043 Multi-purpose Cleaner

ArrowClean 25043 is a truly multipurpose degreaser and cleaner being a combination of surface active agents, sequestrants and alkaline surfactants.

ArrowClean 25044 Degreasing Cleaner

ArrowClean 25044 is an extremely safe, low odour solvent cleaner, containing powerful degreasing solvents and surfactants to aid wash off.

ArrowClean 25045 Low Foam General Cleaner

ArrowClean 25045 is an extremely effective cleaner designed for use in floor scrubbing machines. This product is also suitable for use as a general purpose low foam degreaser around the workshop.

ArrowClean 25020 Machine Cleaner

ArrowClean 25020 is a water soluble, translucent, yellow coloured, heavy duty machine cleaner. It contains special degreasing solvents, along with surfactants, wetting agents and selected additives which prevent offensive odours in water soluble cutting fluids.

ArrowClean 25041 Water Soluble Degreasing Cleaner

ArrowClean 25041 has been specifically formulated as a low foaming, heavy duty all-purpose alkaline liquid cleaner where a degree of in-process corrosion protection is required.

ArrowClean 25042 Water Soluble Degreasing Cleaner

ArrowClean 25042 has been formulated to remove neat or water soluble metalworking and pressing fluids from components in all types of hot and cold washing machines, without creating undesirable foam.

Top ↑

 

ArrowCool

Chem Arrow’s comprehensive range of ArrowCool water based coolants are available in soluble oil, micro-emulsion, semi-synthetic and synthetic concentrates. These products cover the entire range of cutting and grinding applications found in modern industry.

Brochures

A full range of biocide and boron free, high performance, multi-metal compatible soluble oils. Available in both soft and hard water formulations. Developed for machining and grinding of all common ferrous and non-ferrous materials


ArrowCool SOL-827-AL Soluble Oil

ArrowCool SOL-827-AL is an extremely high performance soluble oil which is multi-metal compatible. This unique fluid uses state of the art technology developed to be incredibly bio resistant. ArrowCool SOL-827-AL is formulated to offer complete operator satisfaction along with all the characteristics of a premium fluid.

ArrowCool SOL-829-HM Soluble Oil

ArrowCool SOL-829-HM is a high performance soluble oil which is multi-metal compatible. It is bio-resistant and formatted to offer complete operator satisfaction along with all the characteristics of a premium fluid. ArrowCool SOL-829-HM offers enhanced performance due to added extreme pressure components.

ArrowCool SOL-E30166 Soluble Oil

ArrowCool SOL-E30166 is a high performance, biocide free, emulsion type metalworking fluid which is multi-metal compatible. This fluid offers exceptional performance due to a combination of the latest extreme pressure technology and additives, along with demonstrating an extended sump life.

ArrowCool SOL-227-BF Boron Free Soluble Oil

ArrowCool SOL-227-BF is a high performance, biocide and boron free emulsion type metalworking fluid which is multi-metal compatible. This unique fluid uses state of the art technology developed to be extremely bio resistant.

ArrowCool SOL-227-HM-BF Boron Free Soluble Oil

ArrowCool SOL-227-HM-BF is formulated to offer complete operator satisfaction along with all the characteristics of a premium cutting fluid. This highly engineered product was designed to minimize the effects of hard water.

ArrowCool SOL-827-HM-AL Soluble Oil

ArrowCool SOL-827-HMAL is designed to minimize the effects of hard water and offer complete satisfaction when machining sensitive aluminium alloys.

ArrowCool SOL-835-H Soluble Oil

ArrowCool SOL-835-H is an extremely high lubricity, precision engineered metalworking fluid designed to tackle the most challenging materials and processes. Fortified with high lubricity e4 technology, ArrowCool SOL-835-H offers exceptional performance when utilised on a wide array of materials including aerospace aluminium alloys, stainless steel and titanium. ArrowCool SOL-835-H has been developed for use in areas of hard water

ArrowCool SOL-829 Soluble Oil

ArrowCool SOL-829 is a high performance soluble oil which is multi-metal compatible. It is bio-resistant and formatted to offer complete operator satisfaction along with all the characteristics of a premium fluid. ArrowCool SOL-829 offers enhanced performance due to added extreme pressure components.

ArrowCool SOL-827 Soluble Oil

ArrowCool SOL-827 is a high performance, biocide free, emulsion type metalworking fluid which is multi-metal compatible. This unique fluid uses state of the art technology developed to be extremely bio resistant.

ArrowCool SOL-827-HM Soluble Oil

ArrowCool SOL-827-HM is formulated to offer complete operator satisfaction along with all the characteristics of a premium cutting fluid. This highly engineered product was designed to minimize the effects of hard water.

Top ↑

 

State of the art micro-emulsions which perform very well on multi-metal applications. Machine tool and operator friendly. Perfect choice for facilities attempting to find one product for the entire plant. Biocide & boron free technology available in hard and soft water formulations.


ArrowCool ME-E30172 Micro-Emulsion Coolant

ArrowCool ME-E30172 is an extremely high performance, biocide free micro-emulsion type cutting fluid incorporating revolutionary extreme pressure technology without the use of traditional chlorinated additives.This product is inherently low foam and exceptionally stable in areas of hard water.

ArrowCool ME-E30174 Micro-Emulsion Coolant

ArrowCool ME-E30174 formaldehyde free, high lubricity coolant formulated using a unique combination of raw materials to avoid staining when machining sensitive copper and aluminium alloys. This chlorine free metalworking fluid will perform extremely well on multi-metal applications in areas of soft water.

ArrowCool ME-E30175 Micro-Emulsion Coolant

ArrowCool ME-E30175 is an extremely low foaming, biocide & boron free micro-emulsion coolant formulated using a unique combination of raw materials to avoid staining when machining sensitive aluminium alloys. ArrowCool ME-E30175 has been formulated for use in areas of soft water.

ArrowCool ME-E30231 Micro-Emulsion Coolant

ArrowCool ME-E30231 is a high performance coolant formulated using a combination of latest technology additives. This metalworking fluid is fortified using high lubricity esters ensuring excellent performance on multi-metal applications and aerospace materials.

ArrowCool ME-E740X Micro-Emulsion Coolant

ArrowCool ME-E740X is an extremely low foaming, biocide-free, high lubricity micro-emulsion coolant formulated using a unique combination of raw materials to avoid staining when machining sensitive copper and aluminium alloys.

ArrowCool ME-347 Micro-Emulsion Coolant

ArrowCool ME-347 is a biocide-free, high lubricity micro-emulsion coolant with a revolutionary emulsification package. This chlorine free metal working fluid will perform extremely well on multi-metal applications.

ArrowCool ME-347-HM Micro-Emulsion Coolant

ArrowCool ME-347-HM is a biocide-free, high lubricity micro-emulsion coolant with a revolutionary emulsification package. This chlorine free metalworking fluid will perform extremely well on multi-metal applications. This highly engineered product was designed to minimize the effects of hard water.

ArrowCool ME-355-H Micro-Emulsion Coolant

ArrowCool ME-355-H is a revolutionary metalworking fluid designed to tackle the most challenging materials and processes. Fortified with high lubricity e4 technology, ArrowCool ME-355-H is suitable for use on a wide array of metals including steel, stainless steel, aluminium alloys and titanium. ArrowCool ME-355-H has been developed for use in areas of hard water.

Top ↑

 

Designed to run a wide variety of machine tools and applications including milling, drilling, turning and grinding of ferrous and non-ferrous metals, including cast iron. Biocide, boron and chlorine free technology available in both hard and soft water formulations.


ArrowCool SEM-235-HM-BF Boron Free Semi-Synthetic Coolant

ArrowCool SEM-235-HM-BF is an exceptionally clean running biocide and boron free high lubricity semi-synthetic coolant. This chlorine free metal working fluid will perform extremely well on multi-metal applications.

Top ↑

 

Green in colour with excellent cooling, chip settling and tramp oil rejection. Well suited for machining and grinding of ferrous and non-ferrous metals. Low operating costs. Exceptional lubricity and extreme pressure characteristics with protection against corrosion and rancidity.


ArrowCool SYN-E30173-BF Synthetic Coolant

ArrowCool SYN-E30173-BF is a translucent, green coloured synthetic grinding fluid. When diluted with water ArrowCool SYN-E30173-BF forms a stable solution suitable for use as a multi- purpose grinding fluid.

ArrowCool SYN-E710 Synthetic Coolant

ArrowCool SYN-E710 is green coloured in its concentrated state. When diluted with water, ArrowCool SYN-E710 forms a stable, translucent solution suitable for use as a general purpose machining and grinding coolant.

ArrowCool SYN-E722 Synthetic Coolant

ArrowCool SYN-E722 is green coloured in its concentrated state. When diluted with water, ArrowCool SYN-E722 forms a stable, translucent solution suitable for use as a general purpose machining and grinding coolant.

Top ↑

 

ArrowCut

Chem Arrow’s 40 years of formulating and manufacturing experience has enabled us to develop a comprehensive line of quality cutting oils. Chem Arrow’s ArrowCut line offers products suited to meet a wide range of applications and alloys.

Brochures


ArrowCut E-35046 EDM Fluid

ArrowCut E-35046 is a solvent refined, high flash point, low viscosity, oxidation resistant product designed for use as an electrical discharge machining fluid. It is readily filterable, non-corrosive and dissipates heat rapidly.

ArrowCut E-35041 Heavy Duty Neat Cutting Oil

ArrowCut E-35041 is an extremely versatile, high performance neat cutting fluid offering exceptional lubrication properties. ArrowCut E-35041 is formulated using highly refined mineral oils with active sulphur and other extreme pressure additives.

ArrowCut E-35042 Neat Cutting Oil

ArrowCut E-35042 is a low viscosity, amber coloured, pleasant smelling neat oil. This product is formulated with sulphur and other extreme pressure additives which produce rapid heat dispersion resulting in increased metal removal rates.

ArrowCut E-35043 Heavy Duty Cutting and Threading Oil

ArrowCut E-35043 is a high performance, multi-purpose, cutting fluid. This product is formulated using highly refined mineral oil with sulphur and other extreme pressure additives producing rapid heat dispersion resulting in increased metal removal rates. ArrowCut E-35043 contains no chlorinated additives.

ArrowCut E-35044 Heavy Duty Neat Oil

ArrowCut E-35044 is a heavy duty, extreme pressure neat oil developed for severe cutting and deep drawing operations. A formulation which includes sulphur producing rapid heat dispersion and anti-weld properties. ArrowCut E-35044 contains no chlorine additives.

ArrowCut E-35045 Honing Oil

ArrowCut E-35045 is a heavy duty, low viscosity, petroleum based honing and precision grinding oil. Special additives were selected to provide exceptionally extreme pressure and anti-weld properties. ArrowCut E-35045 is a clear, light coloured liquid that is operator friendly.

ArrowCut E-35047 Super Finishing Oil

ArrowCut E-35047 is a low viscosity, high performance super finishing oil. Special raw materials have been selected to provide exceptional lubricity without the use of traditional chlorinated or sulphurised additives. ArrowCut E-35047 is a clear, light coloured liquid that is operator friendly.

ArrowCut E-35048 Synthetic Neat Cutting Oil

ArrowCut E-35048 is a high performance synthetic neat cutting fluid formulated using highly refined synthetic base oils and high film-strength synthetic esters. This product is formulated free from sulphur and chlorine but encompasses unique additive technology offering excellent performance on a wide range of materials.

ArrowCut E-35049 Neat Pressing and Cutting Oil

ArrowCut E-35049 is a heavy duty, low viscosity pressing and cutting fluid designed for use on high tensile and stainless steel. Special additives were selected to provide exceptionally extreme pressure and anti-weld properties. ArrowCut E-35049 is a clear, light coloured liquid that is operator friendly.

ArrowCut E-35056 Medium Duty Neat Cutting Oil

ArrowCut E-35056 is a high performance, multi-purpose, pleasant smelling neat cutting fluid. This product is formulated using highly refined mineral oil with chloriner and other extreme pressure additives producing rapid heat dispersion resulting in increased metal removal rates.

ArrowCut E-35061 Synthetic Neat Cutting Oil

ArrowCut E-35061 is an exceptional performance, colourless neat cutting fluid formulated using highly refined synthetic base oils and high film-strength esters. This product is formulated free from sulphur and chlorine unique additive technology ensuring excellent performance.

ArrowCut E-35063 Synthetic Neat Cutting Oil

ArrowCut E-35063 is an exceptionally high performance, low viscosity neat cutting fluid developed using unique synthetic ester technology. This product is formulated free from sulphur and chlorine but encompasses unique additive technology ensuring outstanding performance

ArrowCut E-80-B Cutting and Grinding Oil

ArrowCut E-80 B is a translucent, amber coloured light mineral oil based fluid. It contains specially selected additives which improve wetting and plating properties while increasing film strength.

Top ↑

 

ArrowLube

Chem Arrow's high performance lube oils provide increased productivity and reduced maintenance costs. We manufacture our complete line of fluids using high quality petroleum base stocks.

Brochures


ArrowLube E-202 Spindle Oil ISO 2

ArrowLube E-200 series is a premium performance range primarily designed for the lubrication of high-speed spindles in machine tools. It is also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity is selected.

ArrowLube E-205 Spindle Oil ISO 5

ArrowLube E-200 series is a premium performance range primarily designed for the lubrication of high-speed spindles in machine tools. It is also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity is selected.

ArrowLube E-210 Spindle Oil ISO 10

ArrowLube E-200 series is a premium performance range primarily designed for the lubrication of high-speed spindles in machine tools. It is also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity is selected.

Top ↑

 


ArrowLube E-502 Slideway Lubricant ISO 32

ArrowLube E-500 series products are a combination of highly refined petroleum lubricating oils and extreme pressure additives. They are designed to give the ultimate in lubrication on the table and slideways of your modern machine tools.

ArrowLube E-503 Slideway Lubricant ISO 68

ArrowLube E-500 series products are a combination of highly refined petroleum lubricating oils and extreme pressure additives. They are designed to give the ultimate in lubrication on the table and slideways of your modern machine tools.

ArrowLube E-504 Slideway Lubricant ISO 220

ArrowLube E-500 series products are a combination of highly refined petroleum lubricating oils and extreme pressure additives. They are designed to give the ultimate in lubrication on the table and slideways of your modern machine tools.

Top ↑

 


ArrowLube E-601 Anti-Wear Hydraulic Oil ISO 22

ArrowLube E-600 Series products are a blend of highly refined hydraulic oils. These oils were developed to provide the superior anti-wear and film strength characteristics necessary for the new high pressure hydraulic systems.

ArrowLube E-602 Anti-Wear Hydraulic Oil ISO 32

ArrowLube E-600 Series products are a blend of highly refined hydraulic oils. These oils were developed to provide the superior anti-wear and film strength characteristics necessary for the new high pressure hydraulic systems.

ArrowLube E-603 Anti-Wear Hydraulic Oil ISO 46

ArrowLube E-600 Series products are a blend of highly refined hydraulic oils. These oils were developed to provide the superior anti-wear and film strength characteristics necessary for the new high pressure hydraulic systems.

ArrowLube E-604 Anti-Wear Hydraulic Oil ISO 68

ArrowLube E-600 Series products are a blend of highly refined hydraulic oils. These oils were developed to provide the superior anti-wear and film strength characteristics necessary for the new high pressure hydraulic systems.

ArrowLube E-605 Anti-Wear Hydraulic Oil ISO 100

ArrowLube E-600 Series products are a blend of highly refined hydraulic oils. These oils were developed to provide the superior anti-wear and film strength characteristics necessary for the new high pressure hydraulic systems.

ArrowLube E-606 Anti-Wear Hydraulic Oil ISO 150

ArrowLube E-600 Series products are a blend of highly refined hydraulic oils. These oils were developed to provide the superior anti-wear and film strength characteristics necessary for the new high pressure hydraulic systems.

Top ↑

 


ArrowLube E-662 Industrial Gear Oil

ArrowLube E-660 Series products are industrial gear oils combining the highest quality mineral oils and extreme pressure additives. These oils were developed to for use in industrial gear systems of the spur, helical and straights and bevel types.

ArrowLube E-663 Industrial Gear Oil

ArrowLube E-660 Series products are industrial gear oils combining the highest quality mineral oils and extreme pressure additives. These oils were developed to for use in industrial gear systems of the spur, helical and straights and bevel types.

ArrowLube E-664 Industrial Gear Oil

ArrowLube E-660 Series products are industrial gear oils combining the highest quality mineral oils and extreme pressure additives. These oils were developed to for use in industrial gear systems of the spur, helical and straights and bevel types.

ArrowLube E-665 Industrial Gear Oil

ArrowLube E-660 Series products are industrial gear oils combining the highest quality mineral oils and extreme pressure additives. These oils were developed to for use in industrial gear systems of the spur, helical and straights and bevel types.

ArrowLube E-667 Industrial Gear Oil

ArrowLube E-660 Series products are industrial gear oils combining the highest quality mineral oils and extreme pressure additives. These oils were developed to for use in industrial gear systems of the spur, helical and straights and bevel types.

Top ↑

 

Chem Arrow Europe Ltd
Mead House
Bentley Business Park
Bentley, Surrey
GU10 5HY
United Kingdom
Tel: +44-1420-383035
Fax: +44-1420-768210
Chem Arrow Corporation (HQ)
13643 Live Oak Lane
PO Box 2366
Irwindale, CA 91706
USA
Tel: +1-626-358-2255
Fax: +1-626-359-8190
Chem Arrow Canada, LP
720 Guelph Line, Unit 302
Burlington, ON L7R 4E2
Canada
Tel: +1-905-332-0216
Fax: +1-877-532-1799
Chem Arrow Korea
Ace-Hightechcity Bldg, 2-602
775 Gyeongin-ro
Yeongdeungpo-gu

Seoul, South Korea
Tel: +822-368-2020
Chem Arrow CN
Suite 503, 15 South Hongjun
Ying Road

Chaoyang District
Beijing, 100020, PRC
Tel: +86 18612216558